PCD PCBN CBN Cutting Inserts Lathe Tools DNGA120408 Inserts OEM Customized

Cutting Inserts Lathe Tools PCD PCBN CBN DNGA120408 Inserts OEM Customized

overview

The PCBN composite sheet is directly compounded with the CBN layer and the cemented carbide substrate under high temperature and high pressure, and is made into various welding forming cutting tools or blades through cutting and welding processes. Integral PCBN sintered block is directly sintered without alloy matrix to become integral PCBN blade. After sharpening, cubic boron nitride integral polycrystalline blade is made.

Folding has a lower coefficient of friction
The friction coefficient between CBN and different materials is between 0.1~0.3, which is much lower than that of cemented carbide (0.4~0.6), and decreases slightly with the increase of friction speed and positive pressure. Therefore, the low friction coefficient and excellent anti-adhesion ability make it difficult for the CBN tool to form a stagnant layer or built-up edge during cutting, which is beneficial to the improvement of the machined surface quality.

The best tool material for hard machining technology
The finishing of hardened hardware (hardness HRC55 and above) is usually completed by grinding. However, with the development of tool materials and the improvement of machining accuracy of lathes (especially CNC lathes), hard cutting is used instead of grinding to complete parts. The final machining of the machine has become a new way of finishing. This process method of turning grinding has the following advantages:
(1) It can improve the processing flexibility, break through the limitation of grinding wheel grinding, and can process workpieces with different geometric shapes by changing the cutting edge and cutting method;
(2) The environmental protection problems in cutting processing are becoming more and more serious, and the waste liquid and waste generated by grinding processing are more and more difficult to handle and remove, and are harmful to human body, while hard cutting does not need to add coolant, which is of great significance;
(3) High cutting efficiency, short processing time, low equipment investment cost, which can reduce processing cost;
(4) The energy consumed by cutting the same volume is only 20% of that of grinding, so less cutting heat is generated, the machined surface is not easy to cause burns and tiny cracks, and it is easy to maintain the integrity of the surface properties of the workpiece;
(5) Under the same metal removal rate, hard cutting saves energy compared with grinding.
The tool materials usually used for hard cutting include ceramics, TiC coated inserts and PCBN tool materials, but hard turning should be carried out at a higher speed (above 1000m/min), and PCBN is the best tool material variety. For example, in the processing of automobile gearbox synchronizer sleeve fork (material is 20CrMnTi, hardness is HRC58~62), the efficiency is increased by more than 4 times, and the processing cost is reduced to 1/3~1/ of the original grinding process. 2.

Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.