ShenZhen Joeben Diamond Cutting Tools Co,.Ltd
ShenZhen Joeben Diamond Cutting Tools Co,.Ltd build a world-class quality cutting tool brand
Add to Cart
Pcd one flute pcd diamond cnc polishing tools pcd milling cutter for acrylic
overview
The brittleness of diamond cutter is large, the blade is very sharp, easy to produce a broken edge when the impact, so as far as possible in the balance, no vibration of the working conditions, but also should be as far as possible to improve the rigidity of the workpiece and tool and the whole system, increase its seismic capacity, cutting more than 0.05mm below the appropriate.
The higher cutting speed can reduce the cutting force, while the lower cutting speed can increase the cutting force, thus accelerating the failure of the cutting edge. Therefore, the cutting speed should not be too low when using the single crystal diamond tool.
The contact between the single crystal diamond cutter and the workpiece or other hard objects should be avoided in the static state to prevent the cutting edge from being damaged.
| PCD Recommended Cutting Condition | |||
| Work piece | Cutting Speed | Depth of Cut | Feed Rate |
| (m/min) | (mm) | (mm/rev) | |
| Aluminum(5~8% SI ) | 350~1600 | 0.05~2.50 | 0.10~0.40 |
| Aluminum(8~12% SI ) | 350~1300 | 0.05~2.50 | 0.10~0.40 |
| Aluminum(14~18% SI ) | 160~800 | 0.05~2.50 | 0.05~0.25 |
| Copper | 350~1000 | 0.15~2.50 | 0.05~0.20 |
| Sintered Carbid | 15~25 | 0.05~0.60 | 0.10~0.20 |
| Glass Fiber | 100~800 | 0.15~0.50 | 0.03~0.25 |
| Carbon | 160~700 | 0.15~2.50 | 0.15~0.40 |
| High Aluminum | 70~250 | 0.05~1.50 | 0.03~0.15 |
| Ceramics | |||
| Wood | 1000-2500 | 0.2~5.0 | 010~0.50 |
Q: Are you Manufacture?
A: Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Our advantage:
ATTACTION: